double glazing repairs glazing window locks repairs are crucial to keep your home secure. Insecure handles or hinges could allow drafts into your home and make windows vulnerable to burglars. Fortunately, it's not difficult to fix stiff uPVC handles and locks without replacing your door or window. Often, simply cooling or lubricating the mechanisms can help solve any problems. Broken Glass Over time, double-glazing window locks can wear out. The handles can become difficult to open, or even close. This can result in issues with ventilation in the house and could also pose a security risk. It's important that you get the window repaired as soon as you can. Double-glazed windows are made up of two or three glass panes with gas between them to provide insulation and a seal that keeps the panes joined. If you see condensation between the glass panes it is likely that one of the seals needs to be replaced. This usually involves replacing just one window pane and is much cheaper than replacing the entire window. A blown seal in windows with double glazing usually results in condensation and cloudiness. This could be caused by a variety of reasons, such as air leaks, or the presence of moisture in the house. It is essential to contact an expert in double glazing to replace the gas and seal your double-glazed window immediately you notice this issue. It is possible to replace one pan of double-glazed glass, but this is not recommended without the help of a trained professional. This is because it requires specialized tools and knowledge to perform the task safely. Attempting to do this yourself could cause damage to the window's frame, or even to your health. When a double-glazed window is stuck, a lot of people use a crowbar in an attempt to open it. However, this usually results in the frame being damaged and scratched. A specialist in window repair will be able to remove the handle and open your window without causing damage. They can also change the old window mechanisms into modern ones. Over time, window hinges can become stiffer and more difficult to open, especially when the area is noisy. It's important to regularly lubricate your window hinges with silicone spray. Do not close the window using the handles or closing it with a lot of force. This can damage the hinges. Broken Sash This is a typical problem with older double-glazed windows. It isn't easy to lock and open a window if the upper sash is out of its pocket. This usually happens due to pins being disengaged or a balance shoe has been disconnected. It's important to understand how your sash is installed before attempting to fix it. It can be resolved by removing the sash and thoroughly cleaning it. This will let you know whether the sash remains an appropriate match. If not, you'll have to install sash stops to help keep it in place. You can purchase them from the majority of hardware stores or on the internet. Once you've cleaned the sash and replaced the beads that are parting and lubricate the pulley axles with a Teflon or silicone spray. Label the weights prior to removing them so you can reinstall them in the correct way. A broken handle is a common issue. It can be hard to tell if your windows handle is damaged, but there are a few signs. If the handle is difficult to use or feels clunky, or it doesn't feel like it's secured to the frame, then it's damaged. It could be due to a lack of use, or the handle could be cracked or detached. In some cases the handle could be broken internally and unable to be repaired. However, it is still worthwhile to attempt to fix the problem as soon as you can. You may have to unscrew the hinges that hold the window sash to the frame in order to take it off. It's not an easy task, so you'll need someone to help hold the sash steady. After you have removed the hinges, it is important to wash the area around them. Reattaching the hinges is also an excellent idea. You can test the handle to see if it works correctly. If it's not then you should look into replacing it. This will ensure that your window is as secure as possible. Broken Handle It is not uncommon for a window handle to break or weaken over time. It's important to repair any damaged handles as quickly as possible to avoid security and functional issues. Fortunately, a window handle is fairly simple to replace. The window handle can be easily replaced by anyone with a few DIY skills. Contrary to the sash that is secured with multiple bolts, it only requires two screws. It is important to test the handle once it's installed to ensure that it works properly. This should include locking the handle and checking for gaps that could allow drafts in or criminals to gain access to your home. The most typical cause for a broken handle on a window is wear and tear resulting from regular use. However extreme stress or force can also lead to broken handles. Slamming or forcing a window open can place additional strain on the handle, which can increase the risk of damage, therefore it is always recommended to perform any handling tasks carefully and gently. Other reasons for a broken handle could be due to poor maintenance, ageing or design issues. Lack of regular cleaning and lubrication can cause the handle to break down prematurely, and this is usually the result of dirt or other debris that accumulates over time. The handle could be damaged because of improper installation or issues with alignment. If the previously mentioned fixes aren't successful, the Tasker may require access to and take out the lock mechanism itself. This may involve taking out the window frame or removing the plastic bead and frame (to make room). A new lock can be installed that is a similar profile to the current uPVC handle. The new handle will be attached and the process can be completed. If this is the case then the Tasker will give a price for the repair cost. A faulty Lock When window locks get damaged, it's crucial to have the problem fixed immediately. A broken window can cause drafts, weaken security barriers and make the home vulnerable to burglary. Window lock repair is typically a minor job, but it's best to have a professional deal with the issue before it becomes worse and cost more in the long run. UPVC window handles are available in two different styles that include cockspur handles and espagnolette handles. The first uses a central rod that operates the cams in a mushroom shape that lock into window frame keepers. The lock's mushroom cams are activated by a handle connected to spindles. The latch of the lock then clips into the mortise of a window frame's and catches. Both kinds of UPVC window locks are prone to damage, particularly in older homes. This could happen when the sash is warped, misaligned or even comes loose. In these situations the lock should be reinstalled to prevent draughts and loss of energy efficiency. A Tasker will replace the faulty locks for you and give you peace of mind knowing that your windows are safe from intruders. The first thing that a Tasker does to repair your double glazing window lock is examine it and identify the problem. Once they have the required details, they'll set up their tools prior to coming to your home. They'll usually bring along a Phillips head screwdriver and needle nose pliers. wood glue and fine-grit papers. If the sash has been misaligned the Tasker needs to loosen the screws holding each piece of the lock to the frame of the window. They'll then remove the latch and fill the mounting holes with wood putty (if applicable) and sand the area until it's smooth with the rest of the frame. If the lock is rusted, they'll clean it with wire brush or oil and then lubricate it with grease to ensure it's running smoothly. They'll also check if the latch is in a good condition and then re-install it.
double glazing repairs
